SatelliteHome - Canada's most knowledgeable satellite discussion forum

Support => AzBox miniMe American Edition => Topic started by: Tallawah on March 24, 2015, 08:17 PM

Title: Receiver does not boot after kernel upgrade
Post by: Tallawah on March 24, 2015, 08:17 PM

I have a similar problem in moving 1.86 to 1.87 (went well!) then error on 1.87 to 2.03. The orange light does come on for about 10 seconds, then blue forever......No video/audio...I tried all the suggestions in this forum, but nada, just a blank screen and blue light.

Title: Re: Receiver does not boot after kernel upgrade
Post by: Tallawah on March 25, 2015, 08:11 AM

I only tried upgrading last weekend, after waiting sooo looong for a good firmware version. What next?

Title: Re: Receiver does not boot after kernel upgrade
Post by: PwrSurge on March 26, 2015, 02:26 PM

Quote from: Tallawah on March 24, 2015, 08:17 PM

I have a similar problem in moving 1.86 to 1.87 (went well!) then error on 1.87 to 2.03. The orange light does come on for about 10 seconds, then blue forever......No video/audio...I tried all the suggestions in this forum, but nada, just a blank screen and blue light.

In order to avoid confusion, I moved your posts to a dedicated topic just for your issue.

Please describe what happened when you tried to upgrade from 1.87 to 2.03.  Did you the flashing procedure fully complete to 100%?

Title: Re: Receiver does not boot after kernel upgrade
Post by: Tallawah on March 26, 2015, 06:26 PM

In moving to 1.87 everything worked well. I checked the firmware version loaded -1.87. In moving to 2.03 the process went up to about 80%, then I got a file error message. Tried several times after but I could not boot.

Title: Re: Receiver does not boot after kernel upgrade
Post by: PwrSurge on April 01, 2015, 01:52 PM

PM sent.

Title: Re: Receiver does not boot after kernel upgrade
Post by: Tallawah on April 03, 2015, 11:45 PM

Thanks. I will try in a week or so when I get back to base.

Title: Re: Receiver does not boot after kernel upgrade
Post by: Tallawah on April 11, 2015, 10:53 PM

I followed your instructions. The receiver is working very well now. THANK YOU very much.

Title: Re: Receiver does not boot after kernel upgrade
Post by: PwrSurge on April 23, 2015, 10:28 PM

Nice to know that the recovery procedure we sent to you via PM was able to recover your receiver.


Thank you for your patience and enjoy!